PDA

View Full Version : I want to put a smaller pulley on my '03..some questions


SpikeMT
01-27-2006, 12:06 AM
Please forgive me for my ignorance...

I want to put on a smaller pulley. I know I will need to retune the car. Should I just goto Steeda website and get all the stuff I need? Or are there better ways?

Thanks
Steve

ausie
01-27-2006, 06:07 AM
Steeve, I would look at amazon racing for the pully mod and or tune, or if you just want the parts take a look at billetflow
http://www.amazonracing.com

http://www.billetflow.com

InfamousSVT
01-27-2006, 11:49 AM
Steeve, I would look at amazon racing for the pully mod and or tune, or if you just want the parts take a look at billetflow
http://www.amazonracing.com (http://www.amazonracing.com/)

http://www.billetflow.com
I agree 100%, best place for the pulley is BilletFlow IMO. Amazon will provide you with the tune you need :thumbsup:
Great customer service from both:D

TERMN8OR
01-28-2006, 12:47 AM
I went with the BilletFlow upper pulley and Idler pulley.I plan to use BilletFlow again,their products are great.Pro-Dyno tuned my car and made great numbers.Thanks Dan.

kilroy
01-28-2006, 09:49 PM
You will need re-tuning & Amazon Tuning Solutions (http://www.amazonracing.com/) is tops & Rick supports his customers like no other - really goes above & beyond... On the pulley, Jimmy Reichard makes the best. Doug asked Jimmy permission to use his non-slip design - so the BF non-slip its equal. I have seen a few customers of BF that the pulleys were scratching & a lil discolored -which is my only hangup with BF. Metco motorsports makes auxillary idlers that are hardened & will not fade/scratch. You just need to be a fan of pure billet is all (silver)...

kcast
01-30-2006, 12:43 AM
I have a South Florida Pulley Headquarters 2.80 upper and a Lightning Force Performance 100mm aux idler and am very pleased, had an issue with the SFPHQ dub unit and they replaced the pulley ring FOR FREE! Food for thought

Pro-Dyno
02-09-2006, 08:45 PM
Be Happy to discus it with you:)

InfamousSVT
02-09-2006, 11:23 PM
You will need re-tuning & Amazon Tuning Solutions (http://www.amazonracing.com/) is tops & Rick supports his customers like no other - really goes above & beyond... On the pulley, Jimmy Reichard makes the best. Doug asked Jimmy permission to use his non-slip design - so the BF non-slip its equal. I have seen a few customers of BF that the pulleys were scratching & a lil discolored -which is my only hangup with BF. Metco motorsports makes auxillary idlers that are hardened & will not fade/scratch. You just need to be a fan of pure billet is all (silver)...

Well written James :thumbsup: