PDA

View Full Version : how many have ran 10's with an eaton


mkkrs1
02-20-2006, 10:40 PM
how many have crossed the 10 sec 1/4 with an eaton. looking to get mine there and not sure what else it takes with what mods I have. Looking to either Stiegey port or NOS. Both are practically the same price.

Ram77mus
02-21-2006, 01:53 AM
I'd go with a lower pulley and a ported blower:thumbsup:

blk04cobra1
02-21-2006, 09:43 AM
Mike, im gonna agree with Rob on this one...let's port the blower and put a 4lb lower on and you should see 10's with a good set of stickies...now you want low 10's, we'll need to spray a 100 shot or more :thumbsup:

Linn@Amazon
02-21-2006, 01:53 PM
we have a customer running 10.4s with a ported Eaton and upper only

kilroy
02-21-2006, 07:48 PM
http://www.amazontuningsolutionsinc.com/image/15407644.jpg
He's hardcore :thumbsup:

mkkrs1
02-21-2006, 08:46 PM
we have a customer running 10.4s with a ported Eaton and upper only
making how much rwhp?

Linn@Amazon
02-22-2006, 06:58 PM
James...update....10.48:thumbsup:

Ram77mus
02-23-2006, 11:47 PM
We have a old Apten port (ported 2years ago) car with a 2.76 upper that went 10.84@127.2 . Anything can happen, not everything is in the power - it can be a little in driver too:thumbsup: