PDA

View Full Version : 2003 Cobra Whipple charged 18psi


Ram77mus
06-24-2006, 09:12 PM
This is bad azz.- Whipple w/18psi pump gas(93) http://www.pro-dyno.net/gallery/albums/2003-Cobra-Whipple-650hp/DSC01269web.jpg On drag radials http://www.pro-dyno.net/gallery/albums/2003-Cobra-Whipple-650hp/timeslip_005web.jpg

03slidewayzSVT
06-24-2006, 10:33 PM
Well I guess another Happy Customer of PRO-DYNO.......I guess it must of been the Tune:whipit: that fast with only 18# Thats amazing when you get someone that knows how to tune a car:thumbsup: Thats was even a tad on the rich side.....November's going to be SO fun:spimpin: I just can't wait :thumbsup:

InfamousSVT
07-03-2006, 01:14 AM
Better reaction time and 60ft and that'll be a 10.50 or lower car ;) :p
How'd he like the Bogarts?

03slidewayzSVT
07-03-2006, 07:43 AM
Better reaction time and 60ft and that'll be a 10.50 or lower car ;) :p
How'd he like the Bogarts?

He's learning his new found power:cool: Them Bogarts make the car look like it was meant to drag race;)

InfamousSVT
07-03-2006, 10:41 PM
He's learning his new found power:cool: Them Bogarts make the car look like it was meant to drag race;)Sweet can't wait to see it in November:thumbsup: Has he sprayed it yet?

03slidewayzSVT
07-04-2006, 12:28 AM
Sweet can't wait to see it in November:thumbsup: Has he sprayed it yet?
NO, No spray yet....So whats up with your's Jason;)

InfamousSVT
07-04-2006, 03:39 AM
Right now I've got the rear end out of it, going to have the axle tubes welded while I'm getting the new wheel studs pressed in. Also putting in some torque box reinforcements to make sure they don't rip out at the track, even though the car will never see slicks.
Then after I put that back in, I'll be taking out the K-member and fixing the header leak for good this time with all new gaskets.
I'm hoping to upgrade the fuel system sometime between now and drag day and I'd like to have me some Centerline Telstars for track use and the weekend fun :D Althogh they aren't as nice as the Bogarts, I just can't afford them.

Oh yeah and a rearseat delete too......I hate people riding in the back, plus it'll save a little weight off the car too. :thumbsup:

03slidewayzSVT
07-04-2006, 08:00 AM
Thats good that your taking precautions before you destroy it..... Like you said about the rear seat delete.... I don't let anyone ride back there and I'm also before the beach getting the delete kit......:thumbsup:

mrpork
07-04-2006, 08:36 AM
hope they can do that to my car when i comne down to see them(in just a few weeks now)

03slidewayzSVT
07-05-2006, 08:40 AM
hope they can do that to my car when i comne down to see them(in just a few weeks now)

Sure can:thumbsup: Dan & Rob are the Best there is!!!:thumbsup:

mrpork
08-06-2006, 02:47 PM
WELL WENT DOWN AND THEY ARE AND I EVEN HAVE PICTURES OF ROB WORKING :eek:

cobrabitn
08-06-2006, 03:14 PM
How did it turn out Mike?? :doubt:

mrpork
08-06-2006, 03:40 PM
LOVE IT, WELL WORTH MY TIME SOON ILL BE GOING BACK DOWN FOR MORE .(POSSIBLE A WHIPPLE WILL BE PUT ON ) I WANT EVERYONE IN THE NORTH EAST TO KNOW WHO THE BEST IS :thumbsup:

mrpork
08-06-2006, 03:42 PM
I Even Have Pictures Of Dan Working (soon To Be Shown) :eek:

03bloodredsnake
08-06-2006, 03:56 PM
where is pro dyno at?

mrpork
08-06-2006, 04:47 PM
ALL YOU HAVE TO DO IS CONTACT HIM AND HE WILL SET YOU UP TRUST ME I CAME FROM RHODE ISLAND AND PLEASED WITH WHAT HE DID IM ALLREADY PLANNING A RETURN TRIP FOR MORE WORK:thumbsup:

03slidewayzSVT
08-06-2006, 09:32 PM
where is pro dyno at?


Where ever they need to be!!!!! Mainly Charlotte NC area.......Check out their Web site www.Pro-dyno.com (http://www.Pro-dyno.com) ....