PDA

View Full Version : More New Suspension Mods


JROC
05-25-2007, 05:17 AM
Oh yes. :headbang:

Maximum Motorsports Coilovers,(The performance kit no less) Toe-Rod ends, C/C plates, complete rearend kit from Bruce on SVTPerformance with all Delrin bushings, 3/8 wheel spacers, etc. I also added MM FLSFC and a MM k-member brace after I clocked out of work the other day. I had to lift my car with our big forklift and set it on some really big timbers we use to flip Dies on. The only other suspension mod I and missing is my new tires to fit my 18's, they will have 315's in the back.


BTW not all mods pictured.

http://picsorban.com/upload/coilovers.jpg

http://picsorban.com/upload/bushings.jpg

puzzle13
05-25-2007, 11:04 PM
Let me know what you think when you get it finished. I was looking into just about the exact same setup for my 03 vert. :bounce:

JROC
05-25-2007, 11:36 PM
No problem, it may be a few week before I'm able to get this stuff put on though. :thumbsup:

blk04cobra1
05-26-2007, 08:33 AM
No problem, it may be a few week before I'm able to get this stuff put on though. :thumbsup:
looks good...let us know if you need any help getting them on :thumbsup:

JROC
05-26-2007, 04:19 PM
looks good...let us know if you need any help getting them on :thumbsup:
Thanks, thats why it may take awhile. :D I'm trying to get a couple of my buddies that own a lift to help me do it. Could you tell me how much you think you would charge to tackle the job. I have a the rear bushings, coilovers, C/C plates, Tie-Rod Ends to correct the bumpsteer, and rearend brace. I believe thats it for now, I think I'm going to make my own rearend brackets. I just don't want to spend as much money on labor as I'm spending on parts.

puzzle13
05-26-2007, 07:30 PM
did you get the K-member kit for the front? If so ... did you get the normal (pushes the front wheels forward .75") or the offset one that pushes the front wheels forward 1.5"? I am curious about tire rub with the offset of 1.5".

JROC
05-26-2007, 10:14 PM
did you get the K-member kit for the front? If so ... did you get the normal (pushes the front wheels forward .75") or the offset one that pushes the front wheels forward 1.5"? I am curious about tire rub with the offset of 1.5".I just bought the brace http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=996 because I'm not fond of the look of the wheels being pushed forward. Still MM does make a good K-Member for an everyday street car and it will give you a better F/R weight distribution. I have not heard of anyone having problems with it.