PDA

View Full Version : Very Nasty 2007 Shelby With 2.8h Stage 3 KB


Pro-Dyno
08-16-2007, 10:43 AM
Look at this Nasty Ride Harris installed this KB 2.8H stage 3 with around 22 psi :jaw: 817rwhp 777rwtq
http://www.pro-dyno.net/gallery/albums/album28/Web_Shelby_Phillips_1.jpg http://www.pro-dyno.net/gallery/albums/album28/Web_Shelby_Phillips_3.jpg
http://www.pro-dyno.net/gallery/albums/album28/Web_Shelby_Phillips_4.jpg:jawdrop:

Big Daddy
08-17-2007, 12:23 AM
WOW! Great numbers, is that a stock bottom end??? AND if it is how long do you expect it to last with those numbers?
:thumbsup: :thumbsup:

03slidewayzSVT
08-17-2007, 08:03 AM
WOW! Great numbers, is that a stock bottom end??? AND if it is how long do you expect it to last with those numbers?
:thumbsup: :thumbsup:

Who knows?!! Till it blows up:thumbsup:

Ram77mus
10-01-2007, 11:35 PM
just a little update. installed a set of 150lbs injectors and the car made 822hp 789tq:eek: . now a little NOS;)

red04svtcobra
10-02-2007, 07:46 AM
GEEEEEZZZZZ!! That is insane.:thumbsup:

Pro-Dyno
10-02-2007, 09:53 PM
How long :scratch: :dunno: :thumbsup:

Angel
10-16-2007, 04:18 PM
just a little update. installed a set of 150lbs injectors and the car made 822hp 789tq:eek: . now a little NOS;)

:eek: WOW, even at 3900 lbs, that's crazy power! 150lbs fuel feeders!??? :eek:

As aforementioned, "how long" do you think the stock engine and drive will last under that power output? (That is, W/O the Nitrous)

We all know the stock engine has some built internals and a forged steel crank. I imagine the driveshaft will be the first thing to go, then the rear LCAs, and then maybe the rods?

XyX
10-16-2007, 04:56 PM
Wow..thats a lot!

Pro-Dyno
10-17-2007, 08:01 AM
Not real sure they are adding NOS to day so we will see



:eek: WOW, even at 3900 lbs, that's crazy power! 150lbs fuel feeders!??? :eek:

As aforementioned, "how long" do you think the stock engine and drive will last under that power output? (That is, W/O the Nitrous)

We all know the stock engine has some built internals and a forged steel crank. I imagine the driveshaft will be the first thing to go, then the rear LCAs, and then maybe the rods?

03slidewayzSVT
10-18-2007, 08:28 AM
Not real sure they are adding NOS to day so we will see
NOS is already on the car....75 shot...I seen it on Sat. when I was at Harris...That thing is BAD A$$!!!

Angel
10-31-2007, 04:25 PM
Not real sure they are adding NOS to day so we will see
It reasons that if it stays consistent at this level, for a number of times with little variances in the performance characteristics, then it may see up to 1200 hp? :eek: Qualifies as a Very Nasty Ride IMO.:thumbsup:

03slidewayzSVT
11-01-2007, 07:21 PM
The guy that our this car is well off....He doesn't care if it blows up...There going to push it ti its limits....I was told that he said he'll have a new bigger motor built....This is one of several cars he owns along with a Lamborghini and a twin turbo Porsche....I must be nice!!!