PDA

View Full Version : swapping out parts


170k99
10-04-2007, 12:49 PM
Easy question's here...Will the exhaust off of a 03 cobra fit into my 99....and does anyone know if the boost gauge on the 03 is vaccum actuated or electric...I have a Procharger on my 99 and thought that switching out the clusters would be cool, that way the boost gauge in the cluster..
Thx guys I appreciate your help.

sssvtcobra
10-05-2007, 08:24 PM
The exhaust should if your just doing the cat-back. For the gauge, I think it's vacuum actuated, but not positive.

beabout
10-06-2007, 09:40 AM
The boost gauge is not driven by data from the ECM like all the other guages in the cluster. There is a small tube connected to the back of the cluster that provides actual boost pressure to the guage. The stock tube is routed through the firewall on the passenger side. However, the ECM on the 99 may not recognize or electronic connector may not fit the 03 gauge set.

If the 99 is IRS, and I am not sure about that, then the exhaust should fit if hanger points are the same... :thumbsup: