PDA

View Full Version : 03 Cobra Parts for sale


puzzle13
10-26-2007, 08:44 PM
1)Front rotors & calipers, very new street pads (Raybestos QuietStop) included, less than 15,000 miles - rotors SOLD! STILL HAVE CALIPERS Calipers SOLD also!

2)Eaton supercharger w/plenum & LFP 2.8 quick change pulley with 15,300 miles on it (stock pulley also) - SOLD

3)Stock throttlebody with less than 5,000 miles on it

4)BBK twin 65mm throttlebody with around 12,000 miles - SOLD!

5)BBK CAI with around 12,000 miles on it SOLD!

6)stock fuel pumps with around 13,200 miles on them

7)stock cat back exhaust with less than 5,000 miles

8)stock hpipe with around 9,000 miles

9)stock heat exchanger with around 5,000 miles

10)stock supercharger tank with around 9,000 miles

11)stock radiator overflow with around 15,300 miles

12)stock cai w/filter - less than 5000 miles - SOLD!

13)set of drag bags with less than 5000 miles on them

All parts are in excellent condition and prices ... hell, make an offer! I have too many extras in the garage.

I will be in South Carolina at CMP in March and can deliver any parts anyone wants.

puzzle13
10-31-2007, 08:14 PM
Also to sell a set of 39lb injectors out of the cobra with 15,300 miles on them.

XyX
10-31-2007, 10:24 PM
How much for the 2.8 pulley? And do you have a belt for it or no?

puzzle13
11-01-2007, 04:07 PM
I do have the belt, but the pulley is a LFP quick change unit and I don't have the tool to remove the stationary part of the pulley. It is currently attached to the blower. You would be better off just ordering the unit from LFP and changing it out.

silversvo
11-18-2007, 04:12 PM
how much you want for the calipers and rotors?

puzzle13
11-18-2007, 05:39 PM
Rotors were sold while I was in Houston for $30.00 each. I would sell the calipers for $100.00 + shipping. Too bad I couldn't have brought them to you while I was there.

As usual the rubber boots melted off in the first year I had the car ... this is normal as everyone I have talked with had the same thing happen.

puzzle13
11-18-2007, 05:40 PM
Also to sell a set of 39lb injectors out of the cobra with 15,300 miles on them.Injectors and rotors have been sold!

mrpork
11-18-2007, 05:58 PM
sent you a im

Shane361
11-19-2007, 07:48 AM
Eaton with stock pulley?

puzzle13
11-19-2007, 11:34 AM
Eaton with LFP 2.8 pulley installed and stock pulley included ... $250.00 + shipping. Where do you live?

WVSNS&
12-03-2007, 05:19 PM
Thanks for the tb. Works great.

John

puzzle13
12-13-2007, 07:29 PM
Update on parts ...

Throttle body sold!

Eaton blower & stock CAI under contract.

Brake rotors sold!

Still have -

Cobra Calipers
BBK CAI
Stock Cat Back
1 complete set of Steeda Sport Springs
Stock Throttle Body
Stock Heat Exchanger
Stock Radiator Overflow
Stock Fuel Pumps
Stock Supercharger Tank
Stock H-Pipe

All offers welcome. :cool:

tomsgarage
12-17-2007, 08:09 AM
Steeda Sport Springs... are they new or used, and how much?

puzzle13
12-17-2007, 04:14 PM
The Steeda Sport Springs are used ... about 9-10,000 miles on them. I offered them to someone else for $100.00 + shipping. They are $330.00 new, but on sale right now for $296.00. You can visit the site steeda.com to get all the specs on spring rates & drop heights. :thumbsup:

tomsgarage
12-18-2007, 09:01 AM
Just a couple of quick questions, how did you like the springs when you had them on your car? I use the car mostly on the weekends, and go to about 6 ontrack events during the year. How is the ride quality on the road, and difference on the track?

puzzle13
12-18-2007, 05:06 PM
I really liked the ride that they gave on both the street and the track. It was stiffer & lower and once you got used to it it was great. The car handled much better than with the stock springs. The car will sit 1 - 1 1/2" lower with these springs. Yours will be not as much of a change from stock since you have a coupe and I had a convertible. The stock springs on the convertible are not as stiff. If you haven't gotten a good set of caster/camber plates you should with these springs as well as a set of bilstein shocks that are dampered to this spring rate. They will do better with your stock shocks & struts since you have the coupe.

tomsgarage
12-18-2007, 06:19 PM
Ok, I will take them! Email me at tomsgarage@aol.com with details so I can give you my ship to info and how to get you paid!

blueblazes
12-18-2007, 11:20 PM
blower and catback still around?

puzzle13
12-18-2007, 11:53 PM
I still have the Catback, but the blower went out last week.

blower and catback still around?

puzzle13
12-23-2007, 08:27 PM
I also have a set of drag bags for anyone who wants them. New $70.00 + shipping. These have less than 5000 miles on them and they do help with wheel hop on irs cars with stock spring placement. $25.00 + shipping! If anyone needs a set of stock bilstein shocks & struts for their convertible cobra, mine have 15500 miles on them and they are free if someone will pay for shipping. Or I can hold onto them until CMP.

blinkimgone04
01-20-2008, 02:29 PM
is the bbk cold air still available? how much? please email me blinkimgone04@yahoo.com

blueblazes
01-20-2008, 04:25 PM
are they front and back struts?

I also have a set of drag bags for anyone who wants them. New $70.00 + shipping. These have less than 5000 miles on them and they do help with wheel hop on irs cars with stock spring placement. $25.00 + shipping! If anyone needs a set of stock bilstein shocks & struts for their convertible cobra, mine have 15500 miles on them and they are free if someone will pay for shipping. Or I can hold onto them until CMP.

Grimsby53
02-19-2008, 04:49 PM
Do you still have the heat exchanger? I'll give you $50 for it TODAY.

Matt

puzzle13
02-19-2008, 10:43 PM
are they front and back struts?Sorry ... I never had any replies on the shocks & struts so they went to the dump!

puzzle13
02-19-2008, 10:44 PM
Do you still have the heat exchanger? I'll give you $50 for it TODAY.

MattWhere are you located? I will be at CMP in 3 weekends if you are going to be there. Or I can ship if you will pay the shipping.

Grimsby53
02-20-2008, 05:48 PM
CMP? Sorry, not familiar. But I will gladly pay $50 + actual shipping to 33617 (Tampa, FL), assuming the part is in good shape. Could you post or email me a pic of it, or if you can just assure me that it's fine I'll take your word for it. A little nick from a dragonfly here and there is fine-- as long as you never hit any racoons with it, and it doesn't leak. Full address:

Matt Powell
10936 N. 56th St.
Tampa, FL 33617

If you could get a quote and let me know how you'd like to be paid, I'll pay you promptly.

Thanks!