PDA

View Full Version : I will be going to Pro-Dyno tomorrow


JROC
12-03-2007, 05:39 PM
I went to CPR today to see what my Cobra would do on their dyno and look at my A/F ratio. It starts out lean, then it looks good, and then it goes pig rich. I set up an appointment for tomorrow moring with Dan. I'm betting I'll get a decent power increase as well. BTW the printout isn't bad its that my scanners crappy. It won't even show the torque curve.
http://picsorban.com/upload/thehdb.jpg

blk04cobra1
12-04-2007, 10:53 AM
Is that from a "canned" tune or one of their "custom" tunes?

Sonic03inSC
12-04-2007, 09:40 PM
Any update from the tuning?

JROC
12-05-2007, 03:35 AM
Any update from the tuning?
Sorry about that. BellSouths DSL had some problem so I didn't have the IE for a day and a half.

What we think happened is the guy I bought my Cobra from sells cars and he has Ford service them and we believe that Ford put a stock 04 Cobras tune on it because that what it had.

Anyways my experiance with Pro-Dyno has been extremely satisfying. Temperture and humidity was very ideal, but this is with a 2.93 on an unported Eaton, stock lower. I was very surprised and I can defenantly feel the difference. I think I need to go back to DR's. Pro-Dyno FTW!:headbang:

http://picsorban.com/upload/file0046.jpg

JROC
12-05-2007, 03:37 AM
Is that from a "canned" tune or one of their "custom" tunes?Custom. I did a mail order tune on my old GT and I'll never do one again.

red04svtcobra
12-05-2007, 03:48 AM
Congrats, and Dan is da man!! Look at that A/F, dead on 12!!!:thumbsup:

XyX
12-05-2007, 03:51 AM
just a 2.93 you got 490?

red04svtcobra
12-05-2007, 04:16 AM
just a 2.93 you got 490?Give Dan a call, he will definately pick you up power, guarenteed!:thumbsup:

JROC
12-05-2007, 04:54 AM
just a 2.93 you got 490?Pretty good, I know.

2.93 upper + K/N FIPK + Magnaflow C/B + MAC Prochamber + ideal weather conditions + Pro-Dyno tune = 490 whp for me. We were all very impressed. Its normally does happen like that with only those mods. http://picsorban.com/upload/prodyno1.gif

^BTW we should add this smilie to the smilies. :thumbsup:

cobrabitn
12-05-2007, 10:12 PM
I think adding the Pro-Dyno smiley is a great idea but...we cannot add one without adding all of the other supporters for the club, too. I like the idea but I would want to see Amazon Racing, Macon Moore Performance, MV Performance, and all of the others, etc.... If someone is willing to do that, I'm all for it! :thumbsup:

03slidewayzSVT
12-06-2007, 09:03 AM
http://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gifhttp://picsorban.com/upload/prodyno1.gif


Just copy and paste:D

blueblazes
12-07-2007, 02:15 AM
is your prochamer catted? If not you could swap back to a catted xpipe and pick up some power. I had a 2.76 on mine and with stock h-pipe going to catless prochamber I lost power about 12-15 across the board if I recall correctly. Put the stock pipe back on and it picked up.

Good #'s though. What were the sae's?

JROC
12-07-2007, 06:20 AM
is your prochamer catted? If not you could swap back to a catted xpipe and pick up some power. I had a 2.76 on mine and with stock h-pipe going to catless prochamber I lost power about 12-15 across the board if I recall correctly. Put the stock pipe back on and it picked up.

Good #'s though. What were the sae's?
I do not like cats. They do not sound as good + I added my O/R Pro-Chamber because I think my factory cats were clogged.

I need to call Pro-Dyno and get the SAE #'s.

JROC
12-07-2007, 07:49 AM
Pro-Dyno FTW! - CarolinaRides.com Community (http://www.carolinarides.com/forum/showthread.php?p=339388#post339388)

It made 483 SAE. we realy dont see this very often. just a good build and some cold weather. funny thing is did it 2 back to back pulls with no cool down
:D

countrysvt
12-13-2007, 09:53 PM
congrats!!!!!!!:thumbsup:

JayTee
12-21-2007, 01:04 AM
I have a Steggy Stage III, 2.8 upper, 6 lb lower, a JLT 12" CAI, SCT X-3, among some of my mods and only pulled 477RWHP on the dyno this week, does that sound right to any of you?

What could the problem be? I only have 30K on the motor. Here is a link to the dyno pull and the results.
http://s13.photobucket.com/albums/a292/shoguy89/Cobra%20Fuel%20System/?action=view&current=100_0646.flv

I don't know what kind of dyno machine was used, I wasn't there.

JayTee

JROC
12-21-2007, 08:06 AM
^ If it was on a Mustang dyno that would explain it. To be honest the numbers my car made are kind of freakish for my mods. Very nice sounding Terminator BTW. :thumbsup: