PDA

View Full Version : H & R Springs


COX99
01-30-2008, 09:28 AM
Hello, I have ordered a pair of H & R racing springs. I was wondering if I needed any additional equipment to install them. Or if it is alright to slap them on and go? Thanks for your time.

sssvtcobra
01-30-2008, 01:01 PM
Your probably going to need some caster/camber plates if you don't already have them. Even if you don't need them, I highly recommend them so that you can get your alignment set properly. There's a few different brands out there, Steeda, Maximum Motorsports, UPR and some others. I recommend the Maximum Motorsports plates.

It wouldn't be a bad idea to start looking for a set of upgraded shocks and struts either. If you call Maximum Motorsports and let them know what springs you have, they can match up the shocks and struts to the spring rates for ya.

Hope this helps.

COX99
02-01-2008, 10:32 AM
Thats awesome, You have been a big help! Thank you!

Shane361
02-02-2008, 08:39 AM
I would get the maximum motorsport iso's as well. Handy with installing springs? Its rather simple and you dont need to use spring comporessors either-Shane

sssvtcobra
02-04-2008, 03:25 PM
That's also a good idea. I totally forgot about those. Good suggestion Shane361 :thumbsup:

COX99
02-04-2008, 09:33 PM
I have sent Maximun Motorsports a e-mail asking what would be the best configuration for me. Thanks for the help guys!