PDA

View Full Version : TFS Track Heat intake w/1" spacer


Dean95CobraR
04-29-2008, 09:59 AM
I bought this intake used and never had the chance to install it. As far as I can tell, all the threads are good. The 94/95 elbow adapter has one of the EGR screw hole flanges broken off. This was for a race car so I didn't really care. Also, it includes a 1" phenolic spacer with the appropriate bolts that go with it. I do not have the stock length bolts.

The intake is not a show piece and has been sitting in my garage for a couple of years. Some of the coating is chipping off at the bottom of the upper. The mating surfaces are not pitted but do show some oxidation.

Summit is asking $512 for just the intake but this really isn't in new condition. I would like to get $275 shipped to the lower 48.

Paypal, money order or cashier check.

http://www.corner-carvers.com/forums/attachment.php?attachmentid=18468&stc=1&d=1209334298
http://www.corner-carvers.com/forums/attachment.php?attachmentid=18469&stc=1&d=1209334298
http://www.corner-carvers.com/forums/attachment.php?attachmentid=18470&stc=1&d=1209334298
http://www.corner-carvers.com/forums/attachment.php?attachmentid=18471&stc=1&d=1209334298
http://www.corner-carvers.com/forums/attachment.php?attachmentid=18472&stc=1&d=1209334298

Thanks

Dean Smeltzer

Dean95CobraR
04-29-2008, 01:50 PM
Sold!