View Full Version : Need help ASAP!

06-14-2008, 11:14 PM
ok heres the deal...

Its been like 2 weeks with the car broken down, i tagged all the bolts and nuts, but after i was cleaning up i found 2 bolts and i dont know what they go on.

the 2 bolts are about 1 inch in total length.

Flywheel is bolted up and ready to go.
all i have left is the cluth & pressure plate, bellhousing, transmission and driveshaft.

here are my the bolts i have left, minus the 7 bellhousing bolts

06-14-2008, 11:27 PM
scratch that i figure it out:thumbsup:

06-15-2008, 02:30 AM
scratch that i figure it out:thumbsup:

Just curious, what are they?

06-15-2008, 07:30 AM
I will guess cross memeber

06-16-2008, 12:30 PM
They are short threaded, so I was guessing a bracket of some sort.

06-16-2008, 01:24 PM
Since I was just playing with this sort of thing on the '95 track car this weekend, I'd say they are the two bolts that hold the thin metal plate that fits between the block and the bell housing. The plate is held in with the bell housing bolts that go in to the block for the part of the plate that fits against the block. However, on the lower part of the block (like where the oil pan is) there were two bolts that went in from the block side of the plate into the bell housing.

That's my guess.


06-16-2008, 09:55 PM
I'm at a loss on that one