PDA

View Full Version : Suggestion for good torque wrench?


Bartman01
06-15-2008, 11:54 AM
The one that I've got is difficult to set, and the setting and seems to drift a little at times. Thought I would pick up a new one but given how expensive they are I was wondering if there was a good one to get.

03 cobra toy
06-15-2008, 12:31 PM
The one that I've got is difficult to set, and the setting and seems to drift a little at times. Thought I would pick up a new one but given how expensive they are I was wondering if there was a good one to get.

This is what I would buy if I needed one...

http://www.sears.com/shc/s/p_10153_12605_00947712000P?mv=rr

Exige
06-15-2008, 06:00 PM
This is what I would buy if I needed one...

http://www.sears.com/shc/s/p_10153_12605_00947712000P?mv=rrThat is the same one I have and it works quite well.

97CasperCobra
06-15-2008, 06:19 PM
I've got this one as does Larry Frank and it does the job:

http://www.sears.com/shc/s/p_10153_12605_00944597000P?mv=rr

red04svtcobra
06-15-2008, 06:38 PM
I've got 2 craftsmen ones and they both work awesome.:thumbsup:

blue92
06-16-2008, 04:00 AM
http://cgi.ebay.com/ebaymotors/Snap-on-Torque-Wrench-TQR-100-lbs-3-8-drive-Adj-Head_W0QQcmdZViewItemQQcategoryZ43991QQihZ001QQitemZ110261362536QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/Snap-On-Torque-Wrench-1-2-drive-TQFR250E-With-Case_W0QQcmdZViewItemQQcategoryZ43994QQihZ019QQitemZ290237670090QQrdZ1QQsspagenameZWDVW

If you don't mind a previously owned one.

Blownsvtlightning
07-05-2008, 04:08 PM
The one that I've got is difficult to set, and the setting and seems to drift a little at times. Thought I would pick up a new one but given how expensive they are I was wondering if there was a good one to get.


I use Snap-on tech wrenches they are digital and vibrate as you are reaching the proper torque setting.