PDA

View Full Version : MMP does in again 03 Cobra 705hp


Ram77mus
09-10-2008, 02:13 PM
This is another 2003 Cobra with Macon Moore Perf. head and cam combo that runs and drive like stock making over 700hp on pump gas, how do you beat that. Great job guy's
This is the car at Mustang Week with owners wife
http://www.pro-dyno.net/gallery/albums/Keith-Young/DSC03178_705hp_kb.jpg
http://www.pro-dyno.net/gallery/albums/Keith-Young/705_b.sized.jpg

VenomSVT
09-10-2008, 02:44 PM
Hellz yeah!:thumbsup:

RF Cobra
09-10-2008, 10:16 PM
That's awesome!

Hey Chris, what color is that 03 Cobra in the above picture? ;)

http://www.carolinarides.com/forum/images/smilies/prodyno1.gif

red04svtcobra
09-11-2008, 07:54 AM
I'm color blind, but it appears to be TORCH RED:rotf: :p

scrmngdave
09-12-2008, 04:39 PM
This fellow had another shop install a kenne bell and tune the car. When he went to pick it up the tuner told him "These cars don't have good bottom ends, call us when you break it!"WTF! It broke a week later! We got the car and tore the engine down, 2! Melted pistons! The customer was dead set against stroking it to a 5.0, and we wanted see 700rwhp out of a stock displacement 4.6. Jonboy at Hilbish hooked us up with a new cobra block, and we used the stock cobra crank, cobra rods, and a set of Manley pistons. Our own custom head port and cam package and Hoorah-700!! We can duplicate this at any time. I am now beginning the plan for a new combination to see how much more is in the cams and using the new Ford Racing 5.0 cast iron block and a custom piston, we'll see if we can hit 800 to the tire, single power adder! Stay tuned!
Dave:thumbsup:

mrpork
09-14-2008, 10:06 PM
This fellow had another shop install a kenne bell and tune the car. When he went to pick it up the tuner told him "These cars don't have good bottom ends, call us when you break it!"WTF! It broke a week later! We got the car and tore the engine down, 2! Melted pistons! The customer was dead set against stroking it to a 5.0, and we wanted see 700rwhp out of a stock displacement 4.6. Jonboy at Hilbish hooked us up with a new cobra block, and we used the stock cobra crank, cobra rods, and a set of Manley pistons. Our own custom head port and cam package and Hoorah-700!! We can duplicate this at any time. I am now beginning the plan for a new combination to see how much more is in the cams and using the new Ford Racing 5.0 cast iron block and a custom piston, we'll see if we can hit 800 to the tire, single power adder! Stay tuned!
Dave:thumbsup: call me when your ready to do mine

scrmngdave
09-16-2008, 04:43 PM
call me when your ready to do mine
Lol; I'm ready whenever you are Mike!:thumbsup:
Dave