PDA

View Full Version : Hooking up an AMB transponder


Tnmustcobra
02-25-2009, 05:42 PM
I am going to install an AMB transponder on my 1997 Cobra and want it to operate when the ignition switch is turned on. Just needs to hook to a 12v fused system and wonder if anyone can show me where is a good place to wire this in. I am not an electrical expert...but am mechanically able. If someone can give me a diagragm or picture of what to do, I am sure I can get this hooked up. Ground is not a problem, just want to do a nice job with the positive wire and where it won't hurt any other electrical functions.

Thanks,
David

Mystic_Cobra
03-04-2009, 12:16 AM
You just need to find a wire under the dash that is hot when the engine is running. There is probably one inside the console as well. Take a look at the wiring diagrams. Whenever I add any electrical accessories to my car I always add a relay, but you may not need one for this.

Tnmustcobra
03-04-2009, 09:20 AM
I had one of our mechanics at work help me and I hooked up the transponder last weekend. Works like a charm.

Thanks for responding.

David