PDA

View Full Version : JLT Brake cooling kit, priced right!


Tucker
03-23-2009, 04:42 PM
We are almost finished developing a JLT Brake cooling package for the 2007-2009 GT500. It will include 2.5” metal reinforced brake duct hose, custom aluminum brake backing plates (powder coated black) and all needed clamps and hardware. Options will be to add our JLT brake duct bezels to finish the look at a discounted price.
We use 2.5” hose due to the pre made brake duct housing on the GT500 bumper is 2.5”OD. Simply drill from the back side with a 2 ” hole saw and the hoses clamp right on the bumper housing. Then remove the wheels, calipers, rotors and factory backing plates. Use the existing hardware and install JLT’s custom backing plates and connect cooling hose. Reassemble brakes and wheel and your done, very simple install.

Prices:
JLT brake cooling kit $139.00 (FRPP kit is $319-up)
Add JLT brake bezels $50 (black or Silver) and $70 (polished) ($19 savings)

This is not made up of cheap junk parts, it’s just priced right!
We will have at least 10 kits ready to ship in the next couple weeks, but that can be increased if we have more interest.

Here is a shot of the proto type backing plates, the production units will be powder coated black.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20010.jpg
Cool air needs to blow on the center of the rotor for even and productive cooling.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20006.jpg

Cobra4me
03-23-2009, 06:37 PM
now you post this after I had new rotors installed today:(

Tucker
03-23-2009, 07:03 PM
Aaa, it's easy to get back in there.

:cool:

RF Cobra
03-26-2009, 07:01 PM
Was something wrong with the old rotors or was the change for looks?

You know you want them. :)


now you post this after I had new rotors installed today:(

Tucker
03-27-2009, 01:59 PM
Were getting there.
We got the backing plates done today, just waiting on the hose. That should be here sometime next week.

Here's some updates pics of the black plates on my very dirty GT500.
What it goes through for R&D... :thumbsup:
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20016.jpg
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20019.jpg
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20029.jpg
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20022.jpg
Optional JLT Grille Bezels
http://www.jlttruecoldair.com/gallery/pictures/Grill_Bezel4.JPG

Tucker
04-13-2009, 12:42 PM
Ok, folks.
I just picked up the brake hose and will be shipping kits out today.
All who ordered will get emails tonight with a tracking number.

We are still looking at a ship date of 4/22 for the clear and polished bezels, so those who are on order and backorderd (you would have been notified on the phone) your kits will ship next week when they come in.

Thank you for your patience.

Jay