View Full Version : 01 cobra springs

03-07-2011, 12:54 AM
Im wanting to lower my 2001 cobra a little bit and ive heard not to cut my springs if they are progressive rate that if they were linear rate then i would be ok to cut my springs? Is the stock springs on the 2001 cobras linear or progressive? Any advice is helpful! thanks guys!

03-10-2011, 11:50 AM
I'd recommend against cutting the springs, and instead replace them with a new spring. I ran Eibach Sportline's on my GT, and loved 'em.

03-10-2011, 08:58 PM
It would not be wise to cut your springs. Although you can do it physically, the springs were not designed to be cut. Best bet is to buy aftermarket and a progressive rate spring. I would say your stock springs are progressive rate, too.

03-10-2011, 10:49 PM
Thanks guys! i couldnt decide which would be best but know i know they are definitely not going to be cut! :)