PDA

View Full Version : TRADE:2-Weld Draglites 15x10 6.5" bs w/MT ET Streets


Ken 01-Cobra
04-09-2003, 06:36 PM
For Sale: two (2) almost new (1 pass by the person I bought them from) Weld Draglites, 15"x10" 6.5" bs with 5 x 4.5/4.75" bc with correct Weld lugnuts and center caps. $275 + freight. Atlanta area preferred and I will be at FFW Saturday and probably Sunday if you want to save freight.

Dealer cost on these is $161 each + lugnuts + freight. Jegs price on these is $175 each + $45 for the lugnuts + freight. I can accept PayPal.

Reason for sale...these will NOT clear on the 2001 Cobra, even with grinding the control arm!!

tnturbo
04-10-2003, 08:42 PM
What size are the ET Streets or is this just the wheels?

Ken 01-Cobra
04-10-2003, 08:46 PM
Originally posted by tnturbo
What size are the ET Streets or is this just the wheels?
It's just the wheels. I found some 15" Center Lines today that DID clear the control arms after we had ground them some, so I am keeping and using the tires.

The system won't let me delete the message, though it WILL let me edit it! Otherwise I would have deleted the old header and re-entered the message with a new header. Wierd, eh?

tnturbo
04-10-2003, 08:58 PM
No problem. I've had the same problem. What kind of centerlines cleared the brakes?

Ken 01-Cobra
04-11-2003, 07:42 AM
The brakes were never the problem. The problem was the lower control arm on the IRS. The Welds would have cleared the brakes, but would not clear the lower control arm, even with grinding the arm knob. We knocked the corners off of the knob, and the Centerlines worked. The ones that worked were the old 15" Centerline Autodrags.

Ken 01-Cobra
04-12-2003, 08:20 PM
Price update...

Ken 01-Cobra
04-15-2003, 07:33 PM
SOLD!