PDA

View Full Version : Steeda lower control arms


justagt
03-02-2004, 11:43 AM
I have a set I just took off my car that I am trying to sell. Should fit from a '79 to a '98 Mustang. They are the square tube ones with the urethance bushings and about $170 on the website . Asking 90 plus shipping, but make an offer. You will notice the rear axle being a lot stiffer than with the stock stuff. I will be at CMP in case anyone wants them there, too.


Also have a set of Steeda springs for sale. These are what they call the 'competition springs' and are a 750/850 spring. Not to stiff for the road. Will also lower the car a little bit too.

stylin99
03-02-2004, 12:07 PM
Man, I wish those fit my '99. :mad:
I've been looking for a set.

justagt
03-03-2004, 05:08 PM
Actually, I think they will fit any Mustang up to an '04 because I think the chassis is the same. At least that is what the Steeda site says.

cobra330
03-05-2004, 01:05 PM
If they will fit a 98 Cobra...I will take them. Let me know.

cobra330
03-05-2004, 01:08 PM
Maybe I should be more specific...I am interested in the control arms. Sorry. Let me know. They are the Steeda one right?

Cobra Jet
03-15-2004, 12:46 PM
Hey justagt -

are these the Steeda LOWERS you have for sale:

http://www.steeda.com/store/-catalog/suspension/SteelControlArm.jpg

If so, I am interested in buying them, as long as they are not damaged at all and retain the bushings just as they came from Steeda.

Please let me know ASAP if you still have them ($90) as you stated below. I'll be using them on my 94 Cobra.

please PM me. Can you do $95 shipped to NJ (08088)? Just PM me and we can work out the details if you still have them, as I am ready to buy ASAP.

I can also supply NUMEROUS references if needed, as I have bought/sold parts on eBay (790+ positive feedbacks), The Corral, Superstallions, godragracing, CJMF and bimmerforums.

THANKS!
Phil



I have a set I just took off my car that I am trying to sell. Should fit from a '79 to a '98 Mustang. They are the square tube ones with the urethance bushings and about $170 on the website . Asking 90 plus shipping, but make an offer. You will notice the rear axle being a lot stiffer than with the stock stuff. I will be at CMP in case anyone wants them there, too.


Also have a set of Steeda springs for sale. These are what they call the 'competition springs' and are a 750/850 spring. Not to stiff for the road. Will also lower the car a little bit too.

justagt
03-15-2004, 10:19 PM
Hey guys, the first guy that was interested came thru and did end up getting them. Thanks for asking and if I hear of anyone trying to sell any, I will tell them to post it here.