PDA

View Full Version : Larry your car moved...


03 cobra toy
06-07-2004, 06:22 PM
Last step..... :D :thumbsup:

93KingCobra
06-07-2004, 06:51 PM
Dame I thought my car was a 4 x 4 before the springs. Did'nt you have suspention work done also? Hmmmmm I wonder :eek:

cobrapace94
06-07-2004, 06:59 PM
That is the new suspension, the 4X4 look :eek:. I'm thinking Larry is wanting to go off roadracing. ( PS: I do see the jack in the center raising the vehicle to make adjustments).
Looks like it should be ready for Stang Bang. :thumbsup:

Twice Bitten
06-07-2004, 07:36 PM
I went with this style so I can straighten the corners, should shave at least 5 seconds off my lap times. No need to follw the S turns when you can go through them! :D

93KingCobra
06-07-2004, 07:47 PM
I went with this style so I can straighten the corners, should shave at least 5 seconds off my lap times. No need to follw the S turns when you can go through them! :D

:rotf: :rotf: :rotf:

Twice Bitten
06-07-2004, 11:57 PM
Last step..... :D :thumbsup:

I only took my car in to have a rattle checked out in the door :thumbsup: :D :doubt:

Firme
06-08-2004, 02:35 AM
I only took my car in to have a rattle checked out in the door :thumbsup: :D :doubt:

You only took your car in to rattle the check book for one more? what? :doubt:

:jk:

starting a pool on Larry's next mod over here

bluethunder
06-08-2004, 09:59 AM
You only took your car in to rattle the check book for one more? what? :doubt:

:jk:

starting a pool on Larry's next mod over here

http://images.google.com/images?q=tbn:5hCfAQC10ysJ:www.sprengmeister.org/temp/turbo.jpg





'03 with 91mm Percision Turbo and C-4, " Racin Larry"
Engine:
Dart 8.2(302) Deck Iron Eagle block.
CHP 3.4 forged crankshaft.
5.315 forged I-beam rods.
Probe forged dished pistons.
Bennett Racing custom ground turbo hydraulic camshaft.
AFR 205 aluminum heads.
Comp Cams 1.6:1 Pro Magnum roller rockers.
Isky valve spring w/ titanium retainers and locks.
Canton Racing Pro oil pan w/ tray and scraper.
TFS R intake w/ 1 spacer.
Accufab 75mm throttle body.
Compression is at 8.6:1 and the displacement is 347c.i. Redline is 7200 rpm.
Drivetrain:
Tremec 3550HD 5-speed transmission. (Swapping soon)
Steeda Tri-Ax shifter.
McLeod SFI bellhousing.
Billet steel flywheel and Centerforce Dual-Friction clutch. (swapping soon)
Ford Racing aluminum driveshaft and 3.73:1 ring and pinion.
Auburn Pro differential. Moser 31 spline axles w/c-clip eliminators.
Fuel & Spark:
Aeromotive A-1200 fuel pump.
Sumped tank. 8AN feed lines.
Paxton .5 fuel rails.
MSD 96lb/hr injectors.
Aeromotive adj. Fuel pressure regulator.
AEM C2DI ignition amp.
Taylor .409 custom-built spark plug wires.
Factory distributor.
Power Adder:
Garrett UTV9406 turbo charger.
91mm inducer, 142mm exducer. 1.0 A/R hot housing.
Mental Addiction Motorsports extruded intercooler, 26Wx14Hx4D.
Twin Tial 38mm wastegates.
Engine Tuning:
AEM EMS (Engine Management System) stand alone ECU.
AEM dual channel wide band O2 sensor controller.
EMS internal data logging system.


http://www.cartech.net/images/timm3sm.jpg
http://www.cartech.net/images/timmsm.jpg
http://www.cartech.net/images/timm1sm.jpg
http://www.cartech.net/images/timm2sm.jpg

Andy M
06-10-2004, 01:30 PM
His car has been up on the lift so long, it got a nose bleed!!! :rolleyes:

Larry, does your pet snake want to come out and play with my pet snake? and no, I am not talking about that fire breathing beast, but the more docile "red" colored car... ;) :p

bluethunder
06-10-2004, 01:33 PM
Larry, does your pet snake want to come out and play with my pet snake?




<---- Start's to wonder about ANDY??????? :doubt: :eek: :doubt: :eek:

Andy M
06-10-2004, 01:39 PM
now now.... take your mind out of that gutter!!! :rolleyes:

Twice Bitten
06-10-2004, 03:09 PM
Just what snake are you talking about? :D

Andy M
06-11-2004, 11:27 AM
Just what snake are you talking about? :D

the one with the big "ricer" wing on it!!! :rolleyes: ;)

Twice Bitten
06-11-2004, 02:57 PM
the one with the big "ricer" wing on it!!! :rolleyes: ;)

The thing my wife calls a fag hook? ;)