PDA

View Full Version : Safety Harness


Lumpydogs
07-01-2004, 01:28 PM
Looking for the best way to put a pair of safety harnesses into my
stock interior '01 Cobra Coupe. I've heard that you can attach the
shoulder straps to the rear seat belt brackets and attach the lap belts
to the existing lap brackets. Will only need to mount anchor for Anti-Sub
belt. I want to keep the interior nice looking like stock. I have no intentions on adding a cage. This car sees road course action only once or twice a year. Any ideas?

1-QIK-SNK
07-01-2004, 04:51 PM
I don't think you should get them with out a cage. I have talked to a guy that his buddy had 5 point belt in his mustang with out a cage. He was running it some where and ended up crashing and rolling the car. The belts did there job holding him in place, but when the car rolled the roof smashed his head when he had no way to fall down or lean over.
Maybe it was just bad luck, but just beware.
Kerry Miller

2KWhiteSnake
07-01-2004, 11:42 PM
Yep, you need to put at least a 4 point bolt in cage in the car. I had a custom 4 point bolt in done by Tom Lewis at www.Bananamotorsports.com . Tom is in Columbia, SC. It can be removed in about 15 minutes if I ever needed to. This is in my 01' Cobra also.

You have no where to go if that roof starts to come in on you during a rollover.

It's better to be safe than sorry.


Craig

Lumpydogs
07-02-2004, 09:06 AM
I hate to keep adding weight to my snake, but you two are probably
right. I'll look into a 4 point bolt in kit. Thanks!