PDA

View Full Version : looking for 2000 cobra r part


casey99COBRA
11-04-2004, 01:05 PM
I have the 2000 cobra R front splitter on my 99. At the time it was put on, they did not offer the fog light brackets/bezel to mount the fog lights when you bought the splitter... And I've been searching for quite some time now and have had no luck. Does anyone happen to know where i can get them ? Is this something i could possibly order from ford ?
note: these are the black pieces that go in the fog light area.
example:::
http://www.ragesystems.net/svt/f1/bracket001.jpg

Cobra-R
11-07-2004, 09:55 PM
I have the 2000 cobra R front splitter on my 99. At the time it was put on, they did not offer the fog light brackets/bezel to mount the fog lights when you bought the splitter... And I've been searching for quite some time now and have had no luck. Does anyone happen to know where i can get them ? Is this something i could possibly order from ford ?
note: these are the black pieces that go in the fog light area.
example:::
http://www.ragesystems.net/svt/f1/bracket001.jpg

I guess I am a little confused about your question, are you wanting to be able to have your foglights while having the 00R splitter installed? The 00R's didn't have fog lights, thus we won't be any help in that regard. I have no idea whether the splitter would interfere with the fog lights or not.

The front fascia on the 00R is the same as was used on the 01 Cobra, so anything that fits the 01 should work for you.

Brian

casey99COBRA
11-08-2004, 02:06 PM
very interesting... just noticed no fog lights on a 2000 :rolleyes: . I'm not sure what to do then, just looks empty down there. (pic below). Need something to fill it in.
http://www.ragesystems.net/svt/f1/cobrawindow002.jpg

InfamousSVT
11-16-2004, 01:19 AM
If I were you I'd look into the 01 fog lights like COBRA-R has stated! You are right about it looking empty in the front though! You need to get some fog lights put in! My .02:)

99SVT3753
04-20-2006, 02:44 PM
if you do have the drilled slots for it as the first picture shows .. you can get the mounting bezels at your local Ford dealer .. I had to get a set from when the front clip was damaged from a mishap on the military base here locally.


Tim

95R2KR
05-03-2006, 05:47 PM
very interesting... just noticed no fog lights on a 2000 :rolleyes: . I'm not sure what to do then, just looks empty down there. (pic below). Need something to fill it in.
http://www.ragesystems.net/svt/f1/cobrawindow002.jpg

Just a thought, if you painted the inset area around the holes black, like a Cobra R, the darker color in this area may help the holes to not visually stand out so much. Just the inset area, with a matte or flat black.

R