PDA

View Full Version : Special Offer to All SCMC Members from Bumbera's Performance


bluethunder
11-18-2004, 08:27 PM
Kenny is offering Custom Subframe Connectors for the cobra's for $150.00 installed!

Also offered is Unleaded Fuel (104 Octane) for $4.50 A gallon with minimum 5 Gallons!


please call the store or call me on my cell 281-250-4365
Joey

Bumbera's Performance Associates
Located at 630 Hwy 6 South,
1/2 mile south of I-10 on the west side of Houston, Texas
http://www.bumberas.com/images/map.gif

Hours of operation are:
Mon.-Fri. 7AM to 6PM
Sat. 7AM to NOON

Phone: 281.493.9300

93KingCobra
11-19-2004, 09:24 AM
Thats a good price :thumbsup: How is the Quality? Are the fabicated at the shop or are they premanufactured from someone else?

bluethunder
11-19-2004, 09:27 AM
Thats a good price :thumbsup: How is the Quality? Are the fabicated at the shop or are they premanufactured from someone else?


Kenny's Quality is top notch, no cheap stuff here. He puts the same quality into this stuff as he does to his roundy, round cars! These are made in house here at the shop!

Twice Bitten
11-19-2004, 09:51 AM
Can he fix you Yoey? :D

Firme
11-19-2004, 10:01 AM
Joey, do you know the dimensions of the tubing and the wall thickness?

jimmysidecarr
11-19-2004, 10:51 AM
How about a special deal on welding in the ones I already have....
Global West Full length...

I was quoted $200.00 earlier in the year... just to weld them in.

These are .....NOT!!!....... Griggs ----> cut the floor versions.

These are also already assembled(welded together)... although you can buy them in pieces...

If he can fabricate and weld in new ones from scratch for $150.00...

Seems like he could save a lot of time and steel expense...by just welding in the ones I have.

I would much prefer someone quality do the install...... but I felt $200.00 was a bit much.

Thanks...
Jimmy :thumbsup:

Levi
11-19-2004, 11:26 AM
There workmanship is top notch, they did my add on's to my subframes by installing the extrem matrix, jacking rails and torq-arm. The car performed just like I hoped, Bumbera Rocks. :thumbsup:

msmap
11-19-2004, 02:15 PM
Joey, do you know the dimensions of the tubing and the wall thickness?

Yes, Joey, can you find this out?

jimmysidecarr
11-22-2004, 11:27 AM
BUMP!!!
I need my subs welded...
Bumbera has a great rep.


Hmmmmm?????

Jimmy :thumbsup:

bluethunder
11-22-2004, 01:07 PM
Jimmy, You have a pm, As for the demisions they are 2" by 1 1/2" .

Firme
11-22-2004, 01:37 PM
.....they are 2" by 1 1/2" .

cool thanks, but what about
Joey, do you know the dimensions of the tubing and the wall thickness?

93KingCobra
11-22-2004, 10:50 PM
cool thanks, but what about

From what Joey told me they are about a 1/4" thick...

All I know is that they look awesome..can't really fell any differace but your not suppose to :cool:

Firme
11-23-2004, 01:17 AM
From what Joey told me they are about a 1/4" thick...

All I know is that they look awesome..can't really fell any differace but your not suppose to :cool:

I felt a BIG differene when I had my subframes put on :dunno:

93KingCobra
11-23-2004, 09:37 AM
It was raining and I did not want to get on it too hard...

I'm sure once I get to have some fun in it I will notice a little somethin..

jimmysidecarr
11-23-2004, 10:17 AM
1/4" THICK???????


:eek: :eek: :eek: :eek: :eek: :eek:
two hundred and fifty thousandths???????

Probably the plate for the torque box is ....almost that thick....

But the tubing wall thickness????????......... WOW!!!

Firme
11-23-2004, 10:43 AM
.120"-.150" is about as thick as I have seen.

1/4" can't be right..

93KingCobra
11-23-2004, 12:06 PM
Then I don't know...I'll call Joey to see if he can ask Kenny.

bluethunder
11-23-2004, 11:03 PM
they are about 1/8" (.130) thick. these are just box Steel that make great subframes! Cut, welded and bent in house!

Firme
11-24-2004, 12:27 AM
they are about 1/8" (.130) thick. these are just box Steel that make great subframes! Cut, welded and bent in house!

:thumbsup: good size... they seem to be identical to the material that Maximum Motorsports uses, which is a good thing.

raven69david
11-26-2004, 05:43 PM
What about .120" thickness for $125 installed. Is that a good price for full-length sub-frame connectors?

Firme
11-26-2004, 06:17 PM
What about .120" thickness for $125 installed. Is that a good price for full-length sub-frame connectors?

that is awesome. .120" is beefy enough

raven69david
11-26-2004, 08:29 PM
that is awesome. .120" is beefy enoughSweet. Thanks:thumbsup: