PDA

View Full Version : winter mods


Davesnake
01-13-2005, 05:35 PM
Since this will stay in this forum....why don't we list them :)

Line-loc
MJ's brace
new clutch (leaning toward centerforce)
26 spline input shaft
MGW shifter
new tires (allready on)

maybe's
55lb injectors
BAP
maybe a little nitrous :vampsmile

z-cobra
01-13-2005, 07:54 PM
Billetflow machined billet diff. cover (waiting to be put on)
IC polished tank
2.93 Pulley
CF DF clutch & Fidanza flywheel (installed)
MGW shifter (installed)
Ported Blower???

Eastcoast5.0
01-13-2005, 10:22 PM
275 Nitto DR's
Crane Ignition
Fuel Pressure Reg
I just got that Steeda plate to lower the clutch pedal hight.
more to come...

I'm sure they all won't come this winter, maybe finish them up in the spring, budget permitting. I can't wait to get me taxes back....:thumbsup:

Davesnake
01-14-2005, 07:41 AM
z-cobra

Ernie how do you like the MGW shifter?

Dave

z-cobra
01-14-2005, 09:50 AM
z-cobra

Ernie how do you like the MGW shifter?

Dave Dave
I dumped my pro 5.0 for it.I would def. recommend it but if you want to try before you buy you can drive the car and see for yourself.
Ernie

Secesh
01-14-2005, 10:43 AM
Probably early spring after it's back on the road.

Billetflow pulley (size still not decided)
4 piece idler set
Predator tune
Small misc stuff
Subframe connectors (hopefully)

Dave,
I'm still planning to take you up on the offer to help with the pulley & tune.

tom

z-cobra
01-14-2005, 02:11 PM
For everyones info, I have a Billetflow pulley puller if anyone needs to use.

Davesnake
01-14-2005, 05:28 PM
Probably early spring after it's back on the road.

Billetflow pulley (size still not decided)
4 piece idler set
Predator tune
Small misc stuff
Subframe connectors (hopefully)

Dave,
I'm still planning to take you up on the offer to help with the pulley & tune.

tom

No sweat guy, whenever your ready...Ernie I have a BF puller too.

FastFwd
01-14-2005, 10:45 PM
I'm collecting parts right now. I have a set of HansRacecraft subframe connectors and rear diff brace. I ordered a set of idlers, stock size, 3.4, and 2.76 nonslip from BF at the end of Dec. He was going to ship them when he got a MCT Tshirt from Vic(?) that I was supossed to get back in August. I'll probably need to call him again. For some reason that shirt has been imposible to get so I'll probably never get the pullies unless I tell them to forget the shirt and just send the stuff. Maybe I can rent the tool off of one of you guys.

John

Davesnake
01-14-2005, 10:53 PM
I'm collecting parts right now. I have a set of HansRacecraft subframe connectors and rear diff brace. I ordered a set of idlers, stock size, 3.4, and 2.76 nonslip from BF at the end of Dec. He was going to ship them when he got a MCT Tshirt from Vic(?) that I was supossed to get back in August. I'll probably need to call him again. For some reason that shirt has been imposible to get so I'll probably never get the pullies unless I tell them to forget the shirt and just send the stuff. Maybe I can rent the tool off of one of you guys.

John

John,

No problem on the rental.....$100.00 an hour :p

Dave

z-cobra
01-14-2005, 11:16 PM
John,

No problem on the rental.....$100.00 an hour :p

Dave$200.00 and I deliver to your house.:D :D :D :D

FastFwd
01-15-2005, 07:39 AM
Jees, I was kinda thinking more in line of a fine domestic micro brew suddsy kinda thing. However when I used to work in the machine shop I could change a power steering pump pulley in under five minutes so those rates don't sound so bad. :hatparty:

John

Davesnake
01-15-2005, 07:51 AM
Jees, I was kinda thinking more in line of a fine domestic micro brew suddsy kinda thing. John

Whoa!! how said anything about money....mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm Beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeer! :drool:


Dave

z-cobra
01-15-2005, 08:26 AM
John
You just said the magic :D word.Whenever your'e ready.

lightninmike
01-17-2005, 06:00 PM
mods for this winter(or when i get to it)
built motor
patriot heads with stage 2 cams

Davesnake
01-18-2005, 06:06 PM
mods for this winter(or when i get to it)
built motor
patriot heads with stage 2 cams

emmissions?

Dave

lightninmike
01-19-2005, 08:53 PM
what about them??? it should still pass with a stage 2 cam
hell Dons Bolt does and he is runnin 10's

Davesnake
01-20-2005, 06:34 AM
what about them??? it should still pass with a stage 2 cam
hell Dons Bolt does and he is runnin 10's

just asking.....didn't know.

lightninmike
01-21-2005, 05:50 PM
hell i'll just be happy that it runs, ya know what i mean:bounce:

BADASS03SVT
02-04-2005, 08:34 PM
26 spline input shaft (here)
ram clutch
vortech ice box (here)
nitto 315 dr's
battery in the trunk with shutoff
springs or coil overs?????
rear control arms

and hopefully get kicke doff the track and 1 wheel up!