SCMC Message Forum

SCMC Message Forum (
-   Show and Shine (
-   -   Wheels (

Redfire GT 07-24-2003 10:04 PM


JBejarano 07-24-2003 10:19 PM

03 cobra or Anniversary wheels?

Redfire GT 07-24-2003 10:43 PM

Right now it has the Silver BULLITT wheels on it. And of course the color of the Mustang is"REDFIRE." Thought about the polished BULLITT wheels.

smashedheadcat 07-24-2003 11:04 PM

I like the FR500 wheels, but they are 18's.

JBejarano 07-24-2003 11:05 PM

polished would look good, ever thought of maybe doing black bullitts with that polished lip?

Redfire GT 07-26-2003 08:57 AM

What is the width on the FR500 wheels? I want something a little wider than the 8 in. in the rear. Something to fill the fenderwell up.

ausie 04-14-2004 07:06 AM

re wheels,
It may be difficult to find alternate wheels in a size 17 that have a fitment for the mustang. I had searched extensively for wheels in the 17 inch arena but my criteria was to find a wide width wheel for the rear that had a deep dish appearence instead of the FWD look. There is a set of the cobra R wheels in size 17 inch that has a 10.5 inch rear but I was not interested in wheels that everybody else had. I decided on a set of BBS RK Plasma 10x18 rear and 9,5x18 front. Yes they are 18 inch. The trick it to find wheels with the proper offset and stud dimensions. You could do a seach in tirerack or other wheel distributors on line. Some of the sites will use a picture or graphic to let you see what the car will look like with the selected wheel installed (it will give you a rough idea only). Once you have selected a wheel, then you have to select the tires. One thought on this, if you use a site like tirerack that has a wheel of similar dimensions you desire, you can also determine what tires will fit that wheel size. good luck in your seaching.

venomous 04-14-2004 04:39 PM

I really like the Chrome 2000 Cobra R's. In my opinion they are some of the purtiest wheels Ford has made. :cool: :fordflag:

96MysticSVT 04-14-2004 04:54 PM


Originally Posted by venomous
I really like the Chrome 2000 Cobra R's. In my opinion they are some of the purtiest wheels Ford has made. :cool: :fordflag:

I agree! On 94-98's the 95 Cobra R's look awesome, but on the 99+ the 2000 R's look best.

ausie 05-11-2004 06:40 AM

In my opinion, the Cobra R wheel is a nice choice in chrome. In that style they do offer a 10 inch wide rear wheel. In my wheel selection, I was not interested in maintaining that FWD look. 10 inch width will fill in the rear fender well nicely (which is what I have in the rear) You could easily go up to a 12 inch width in the rear and possibly a 13 inch as long as the wheel has the same offset measured from the inner lip of the rim to the hub. As for the front end, the offset becomes critical in providing clearance for the front calipers. I went after wheels that had a sort of deep dish appearance for the rear and had a matching style for the front. 9 inch is probably the widest you could mount on the front. My wheels in the front are 8.5 inch. To keep the cost of the rubber down (a tad) I chose the BBS RK plasma wheels 10x18r 8.5x18 front. The rear measures about 11.5 inches with 275/35/18's mounted on them. I could easily get a wider tire to fit, perhaps 315/35/18 but they will be a little pricey and harder to find in the brand I like. What is nice, the style of wheel I got has a resemblance to one of the wheel options on the FORD GT. The design is similar to the FR500 wheel but, since ford went to a solid cast instead of the three piece design that was on the FR500 I lost interest since they decided to only make wheels that fit the front and not compliment the rear (in regards to filling out the fenderwell). Sure, solid cast wheels are easier to maintain and to produce, but at least offer a wider width for the rear!

ausie 05-11-2004 06:43 AM

Here is what my wheels look like hope this link works.

nckissfan 05-11-2004 01:04 PM


Originally Posted by ausie
Here is what my wheels look like hope this link works.

nope :(

ausie 05-12-2004 06:13 AM

bummer, I guess I better get started on creating a web page so I can at least show some pictures.

ausie 05-12-2004 07:17 AM

Perhaps this may work

ausie 05-12-2004 07:56 PM

Here is a picture of my car with BBS RK Plasma 18x10r 18x8.5f.
There is still a bit of an overhang on the rear fender (close to 2 inches) but the wheels do not appear to sink in like the stock wheels did.

All times are GMT -4. The time now is 04:56 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 1999-2019 SCMC, Inc