SCMC Message Forum

SCMC Message Forum (http://www.svtcobraclub.com/forums/index.php)
-   96 - 01 SVT Cobra Forum (http://www.svtcobraclub.com/forums/forumdisplay.php?f=4)
-   -   Troubleshoote code P0420 (http://www.svtcobraclub.com/forums/showthread.php?t=2901)

98Cobretti 11-13-2002 08:38 PM

Troubleshoote code P0420
 
I got this code and it came up as: The PCM has determined that the catalyst system efficiency for bank 1 is below threshold for the current engine operating conditions. (bank1 identifies the location of cylinder #1, while bank 2 identifies the cylinders on the opposite bank).

After I got the code, I bought the Mil eliminators and thought that it was fixed, but I just got a check engine light again the other day, and havent had it scanned yet, but am pretty sure it is the same thing. So is this a malfunctioning catalytic converter, or a malfunctioning O2 sensor? Help!

cobragb 11-13-2002 10:43 PM

That's strange. I would say that something is up with the mil eliminator on the passenger side. You may want to recheck your wiring.

Glen

98Cobretti 11-14-2002 03:54 AM

I bought the Dallas plug in kind, I don't think its wiring. I just wonder if it could be a bad cat or something, my car makes a funny smell, not really strong but almost smells like a bad cat, rotten egg smell a little. The x pipe has only been on for about 6000 miles or so maybe a little more.

cobragb 11-14-2002 11:10 PM

It doesn't matter if you have bad cats or not with mil eliminators, the computer should ignore the back O2 sensors. Are you sure that is the only code you are pulling? I would try to switch the sensors, then the eliminators one at a time and see if the problem moves to the other bank.

Good luck,
Glen

98Cobretti 11-19-2002 05:21 AM

I would have it scanned, but the check engine light went away, I will switch the 02 sensors, and if it comes up again I am going to go get it scanned again and see what comes up. What if it isnt the rear sensors at all, but the front going bad maybe?

cobragb 11-20-2002 10:03 PM

Quote:

Originally posted by 98Cobretti
What if it isnt the rear sensors at all, but the front going bad maybe?
I am pretty sure it would be a different code for the front sensors.

98Cobretti 11-20-2002 10:23 PM

How do you know what sensor it is, it only says bank 1, it doesnt say front or rear sensor, is there a way to tell what exactly that code means? I just have the info the scanner said. Is that a code distinctly for the rear sensors? Thanks for the help by the way!


All times are GMT -4. The time now is 12:57 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1999-2019 SCMC, Inc