SCMC Message Forum

SCMC Message Forum (http://www.svtcobraclub.com/forums/index.php)
-   Cobra Ladies (http://www.svtcobraclub.com/forums/forumdisplay.php?f=38)
-   -   COBRA modifications II (http://www.svtcobraclub.com/forums/showthread.php?t=3222)

smashedheadcat 01-18-2003 09:08 AM

Quote:

Originally posted by winddysvt
==================


good for you Josh --

whoever she is - she'd better take good care of you....

and, shhhhhhh
don't tell anyone, but most of the time I have to remind Tim that YES, I do love him more than my Cobra! Very much so.... !!

OK Josh -

Trigger and Flash said that as soon as you get your Cobra put together again, we all need to have a little talk about behavin' ourselves..



:thumbsup: :thumbsup: None of this downtime .... it ain't fun! :(

She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady. :D And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.

winddysvt 01-18-2003 09:16 AM

Quote:

Originally posted by smashedheadcat
She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady. :D And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.
------------


good for you Josh!

Cobra mod's are fine...

but the most important person (your other half) in your life is the modification of a lifetime!!!!

:thumbsup: :thumbsup:

winddysvt 01-27-2003 09:28 PM

1 Attachment(s)
this will be a good place for me to throw in the possible modifications for Bully .....

heres the picture that I worked on:

NO 5 OH 01-28-2003 03:02 AM

Okay here I go ;) ;)

01 True Blue Cobra Convertible
#2266 of #3384 built on 06/08/01
Cobra embroidered floor mats
Custom vintage aluminum Cobra shift knob
K&N Filter

86 Black Mustang SVO
1 of 3382 built on 10/10/85
Precision Turbo and Engine T3/TO4E 60 trim stage 3 w/.63 A/R hybrid turbo
Modified Buick Grand National intercooler w/Duttweiler neck
Custom "Big Log" header by Bob Lee
ATR 3" madrel bent downpipe off turbo, no cat; internal wastegate
ATR 3" to 2 1/2" mandrel bent y-pipe
Magnaflow 2 1/2" catback
Gutted upper/ported lower stock intakes
Fluidyne aluminum radiator
Flex-a-lite dual 12" spal puller fan with adjustable thermostat and AC relay
Turbo XS manual boost controller
Turbo XS blow off valve Type H-RFL
Tiny Avenger Cold Air
MSD 6AL with Blaster coil
Simple Digital Systems (SDS) stand alone engine management
Seimens/Deca 83 lph fuel injectors
Kirban adjusable FPR
Walbro 255 lph in tank pump
Autometer boost, fuel pressure, air/fuel ratio gauges on a-pillar
SVPU white-faced overlay kit
SVOCA bi-wing supports
SPEC Star Stage 3 clutch
Turbocoupe 8.8 rear w/3.55 gear
Ford Racing "SVO" aluminum rear end girdle
Ford Racing aluminum driveshaft
Ford Racing HD upper control arms
Maximum Motorsports caster/camber plates
Maximum Motorsports std. lower control arms
Maximum Motorsports adjustable rear sway bar
H&R sport springs
Energy Suspension bushings throughout
Stillen Metal Matrix brake pads front and rear
Motul 600 brake fluid

330 rwhp or bust :eek: :eek: ;) ;)

When fundage permits last on the list will be:

Ported/polished big valve iron head (1.89/1.59 valves)
Custom reground Ranger roller cam
Esslinger round tooth pulley upgrade w/adjustable cam pulley
Esslinger Billet idler
Esslinger Billet timing pointer
Esslinger Billet water pump
Esslinger 4" crank pulley

400+ rwhp or bust... 25 psi on stock bottom end :eek: :eek: :thumbsup: :thumbsup:

winddysvt 01-28-2003 09:30 AM

Wow Shannon !

thx for sharing that with us!


Your '86 is absolutely awesome ---



Hey, can you share a picture of it with us?

NO 5 OH 01-29-2003 03:00 AM

Quote:

Originally posted by winddysvt
Wow Shannon !

thx for sharing that with us!


Your '86 is absolutely awesome ---



Hey, can you share a picture of it with us?

I promise I'll share pics with ya once I get them here, more or less. The friend that's helping me do all the work has a digital camera and has taken pictures, but I haven't had him e-mail them to me yet. There's not a whole lot to show at the moment... just a dirty car with no rear suspension to speak of ;)

The list above is what I have for the car now, but not all of it is on the car yet and might be awhile before it all gets on. We only get to work on the car on Saturdays and when you've got more mods to do to the car than you can shake a stick at it takes a good deal of time. If you and Tim get to fly down for your anniversary to Kershaw it should have most of all the mods done by then... I'm hoping all the suspension components and the stand alone from SDS. If you both make it I'll give the both of you a ride if you'd like :thumbsup:

I hope I haven't "tainted" the thread... you're the only person to reply since early this afternoon :(

smashedheadcat 01-29-2003 12:43 PM

Quote:

Originally posted by 97whitevert
hehehe gotcha!! i was kidding with you!!:bounce:
:D:D

smashedheadcat 01-29-2003 12:45 PM

You haven't had that SVO long have you Shannon?? Ehh..... I guess that's been quite some time ago. Nevermind. Nice list of mods!! Dang nice list of mods.:hail:

winddysvt 01-30-2003 11:06 AM

Quote:

Originally posted by NO 5 OH
I promise I'll share pics with ya once I get them here, more or less. The friend that's helping me do all the work has a digital camera and has taken pictures, but I haven't had him e-mail them to me yet. There's not a whole lot to show at the moment... just a dirty car with no rear suspension to speak of ;)

The list above is what I have for the car now, but not all of it is on the car yet and might be awhile before it all gets on. We only get to work on the car on Saturdays and when you've got more mods to do to the car than you can shake a stick at it takes a good deal of time. If you and Tim get to fly down for your anniversary to Kershaw it should have most of all the mods done by then... I'm hoping all the suspension components and the stand alone from SDS. If you both make it I'll give the both of you a ride if you'd like :thumbsup:

I hope I haven't "tainted" the thread... you're the only person to reply since early this afternoon :(


==============


tainted the thread?

no way - no way !!

you keep posting ok?

:thumbsup: :thumbsup: :thumbsup: :bounce:

winddysvt 01-30-2003 11:10 AM

Hey --


can y'all do me a favor?


some of ye already have (thanks)


can you help me with my Contour wheel decision?

whether ye likes SVT Contours or not, I need unbiased opinions ....

go here k?
http://www.svtcobraclub.com/svtbbs2/...&threadid=3292



and
BEE Honest !!!!


honesty is the key -
to be Happy !!!!

hey, that rhymes !!

winddysvt 03-05-2003 08:59 PM

Quote:

Originally posted by smashedheadcat
She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady. :D And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.

==============


hey Josh --


do you have your car back yet?

I hope ..... :confused:

winddysvt 03-05-2003 09:02 PM

is Josh really in the middle East?

you out there Josh?



were thinking about you !!!


:thumbsup: :bounce: :)

winddysvt 03-05-2003 09:05 PM

Josh --

does this make you feel better?

my next mod for Trigger is gonna be a rear shock tower brace....

thats about all I can afford for her this year ---

although, I will be putting in a few things that I bought last year that I never installed....

last year was a bummer....

here's to a better year !!

and to pray for all of our friends out there and hope they all come home to us safely....

:)

winddysvt 03-05-2003 09:07 PM

oh wait,

anti squat brackets or whatever there called....


yeah,
those ......

:rolleyes: :thumbsup:

smashedheadcat 03-07-2003 04:53 PM

Quote:

Originally posted by winddysvt
==============


hey Josh --


do you have your car back yet?

I hope ..... :confused:

Hey Bonny. I do have my engine back. I got it back a few days before I shipped out.


All times are GMT -4. The time now is 03:57 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2017 SCMC, Inc