sorry it took so long... been ultra busy lately...
My husband and I have had a variety of different suspension components over the years....
We now have Kenny Brown components on all three of our Mustangs and we are absolutely thrilled!!
I took my Mach 1 to a track event a few weeks ago and took some instructions from Ken Adolf.
He helped me to see the cars potential and he helped me not to be so "afraid of it"...
Brad at Kenny Brown said that the "rear end" on this car is versatile while still being streetable.
and -- he was right! Lately, I have been driving it like crazy and I cannot believe how much different it is from stock --
to make a long story short (I talk too much)...
I cannot even drive these cars to their full potential...
I'm going to try and go to Panoz next year and get a couple days of schooling in so that I can learn this suspension even better.
Its awesome!!
On another note -- many of the suspension components are there started with Kenny Brown -- most of them are very similiar to his.. and/or perfect copies!
hey -- it works and ..
hey -- thats a complement!! Especially his bracing and extreme matrix bracing, jacking rails, etc. etc. you just cannot find better. Kenny loves Mustangs, especially Cobra's --
thats his baby !!
My 98 Cobra (look at the top right of your page --- it is the blue one) was done about 3 years ago, and I thought I could never find better. Well, I was wrong. Tim has people standing in line to take rides in his '99 Kenny Brown and it doesn't even have any engine mods. He stays up with guys that have 150 more horsepower than he does.
Don't believe me?
Just come to the events next year ... you'll see..... He's on everyone in the curves cuz theres no stopping that car...
well.
except grease and snow......
Kenny Brown Performance has come a long long way in the past few years and he is always under the hood designing something new....
:-)
just wait until you see what Kenny has coming next!!
your best bet would be to call Rich at Kenny Brown and talk to him with any questions or concerns you may have....
Winddy
Quote:
Originally Posted by cobra330
For those of you out there that have Kenny Brown suspension components..let me know what you think of them. My original plan was to go MM components with H&R SS. I may consider another route...so let me hear your opinions...or for those of you who read this..and have MM or Griggs..let me know what you think of those options.
Thanks!
|