SCMC Message Forum  
Go Back   SCMC Message Forum > SVT Platforms > 96 - 01 SVT Cobra Forum
User Name
Password

Register FAQ Members List SCMC Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread
Old 07-11-2012, 08:00 PM   #1
ROC REV
Registered User
 
Join Date: May 2012
Posts: 3
01 cobra front brake caliper issue

Hi this is my first post. I feel like such a dork. Anyway, my right front brake caliper is making noise, but not like when I use the brakes. It's like there is a spot where the pads must be hitting the rotor just rolling down the road. It makes like a beep and the beep is faster or slower depending on how fast I go. My brakes work great so I was hoping not to need to change them. It seems that the calipers are closed a little too much... there is a slight drag there when you spin the tire with the car on a jack... a faint whisper... and then when it hits the one spot, a squeak.

Any suggestions for fixing this?

Thanks... and this is cool.
ROC REV is offline   Reply With Quote
Old 07-11-2012, 09:46 PM   #2
cobrabitn
Dr Jekyll on the street, Mr Hyde on the track
 
cobrabitn's Avatar
 
Join Date: Jun 2001
Location: Rock Hill SC
Posts: 14,614
Send a message via AIM to cobrabitn
First thing I would do is see if the rotor is warped from heat? Take your left wheel off the ground and see if it scrubs, if not put the left rotor on the right hand side to see if that fixes it. If it does, you need a new rotor.

While you have the wheel off, check and see if the low brake pad indicator is scrubbing the rotor. If it is, then you need new pads.

Thirdly, move the wheel around to see if you have bad bearings on your front hubs. That will probably be the most costly.time consuming to fix.

Welcome to our forums!!
__________________
Cobrabitn



2016 Ruby Red Metallic with Caribou accent F-350 Crew Cab

Stump Puller! 6.7 Diesel Automatic with Chrome Package, Off Road Package, 3.55 Locking axles, and Ultimate Lariat Interior Trim Package!

2013 Race Red Boss 302 Coupe - track car!

No mods yet!

2009 Vista Blue Shelby GT 500 Coupe - Garage Queen

Tinted Windows
JLT True Cold Air Kit
Pro-Dyno Tune
526 rwhp - 511 rwtq


1994 Rio Red Indy Pace Car #22 "Runabout"

Snake in the grill
MGW shift knob
1996 SVT Cobra Wheels


1969 New Lime Mustang Mach 1 Sportsroof - Second owner - bone stock with shaker.

One SVT Cobra, one Shelby GT500, one 69 mach 1, and a Boss 302 is better than nothing!

Custom Data Plates for your Mustang or Ford!

Buy "Cool Merchandise" at Data Plates Plus
www.dataplatesplus.com

See my MSR Video here!
cobrabitn is offline   Reply With Quote
Old 07-12-2012, 02:49 PM   #3
ROC REV
Registered User
 
Join Date: May 2012
Posts: 3
Thanks very much!
ROC REV is offline   Reply With Quote
Old 07-16-2012, 11:00 AM   #4
Mystic_Cobra
NASA American Iron #16
 
Mystic_Cobra's Avatar
 
Join Date: Oct 2001
Location: Northern VA
Posts: 690
Good tips!

The best way to check the hubs is to jack that corner up and shake the wheel/tire with it still bolted on...better leverage that way.

If you haven't found the culprit, you should pull the pads off and check to see if they are wearing evenly. You should be able to see it just by looking but if you hvae a digital caliper, stick it on there and measure. You might also try swapping the pads from side to side.

The pad indicator Tony is talking about is just a little metal clip. It's there to tell you your pads need to be changed (or you clip needs to be adjusted).

Put the front end up on jack stands and crawl under there and look around. You never know what you'll find under there but it's good to get familiar with your suspension.
__________________
Jimmy Bost #00539
American Iron #16 Ford Mustang Cobra
Mystic_Cobra is offline   Reply With Quote
Reply

Tags
brakes, caliper, squeak, sticking


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:34 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2017 SCMC, Inc