COBRA modifications II - Page 3

smashedheadcat · 01-18-2003, 10:08 AM

Quote:

Originally posted by winddysvt
==================

good for you Josh --

whoever she is - she'd better take good care of you....

and, shhhhhhh
don't tell anyone, but most of the time I have to remind Tim that YES, I do love him more than my Cobra! Very much so.... !!

OK Josh -

Trigger and Flash said that as soon as you get your Cobra put together again, we all need to have a little talk about behavin' ourselves..

None of this downtime .... it ain't fun!

She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady.

And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.

winddysvt · 01-18-2003, 10:16 AM

Quote:

Originally posted by smashedheadcat
She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady. And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.

------------

good for you Josh!

Cobra mod's are fine...

but the most important person (your other half) in your life is the modification of a lifetime!!!!

winddysvt · 01-27-2003, 10:28 PM

this will be a good place for me to throw in the possible modifications for Bully .....

heres the picture that I worked on:

NO 5 OH · 01-28-2003, 04:02 AM

Okay here I go

01 True Blue Cobra Convertible
#2266 of #3384 built on 06/08/01
Cobra embroidered floor mats
Custom vintage aluminum Cobra shift knob
K&N Filter

86 Black Mustang SVO
1 of 3382 built on 10/10/85
Precision Turbo and Engine T3/TO4E 60 trim stage 3 w/.63 A/R hybrid turbo
Modified Buick Grand National intercooler w/Duttweiler neck
Custom "Big Log" header by Bob Lee
ATR 3" madrel bent downpipe off turbo, no cat; internal wastegate
ATR 3" to 2 1/2" mandrel bent y-pipe
Magnaflow 2 1/2" catback
Gutted upper/ported lower stock intakes
Fluidyne aluminum radiator
Flex-a-lite dual 12" spal puller fan with adjustable thermostat and AC relay
Turbo XS manual boost controller
Turbo XS blow off valve Type H-RFL
Tiny Avenger Cold Air
MSD 6AL with Blaster coil
Simple Digital Systems (SDS) stand alone engine management
Seimens/Deca 83 lph fuel injectors
Kirban adjusable FPR
Walbro 255 lph in tank pump
Autometer boost, fuel pressure, air/fuel ratio gauges on a-pillar
SVPU white-faced overlay kit
SVOCA bi-wing supports
SPEC Star Stage 3 clutch
Turbocoupe 8.8 rear w/3.55 gear
Ford Racing "SVO" aluminum rear end girdle
Ford Racing aluminum driveshaft
Ford Racing HD upper control arms
Maximum Motorsports caster/camber plates
Maximum Motorsports std. lower control arms
Maximum Motorsports adjustable rear sway bar
H&R sport springs
Energy Suspension bushings throughout
Stillen Metal Matrix brake pads front and rear
Motul 600 brake fluid

330 rwhp or bust

When fundage permits last on the list will be:

Ported/polished big valve iron head (1.89/1.59 valves)
Custom reground Ranger roller cam
Esslinger round tooth pulley upgrade w/adjustable cam pulley
Esslinger Billet idler
Esslinger Billet timing pointer
Esslinger Billet water pump
Esslinger 4" crank pulley

400+ rwhp or bust... 25 psi on stock bottom end

winddysvt · 01-28-2003, 10:30 AM

Wow Shannon !

thx for sharing that with us!

Your '86 is absolutely awesome ---

Hey, can you share a picture of it with us?

NO 5 OH · 01-29-2003, 04:00 AM

Quote:

Originally posted by winddysvt
Wow Shannon !

thx for sharing that with us!

Your '86 is absolutely awesome ---

Hey, can you share a picture of it with us?

I promise I'll share pics with ya once I get them here, more or less. The friend that's helping me do all the work has a digital camera and has taken pictures, but I haven't had him e-mail them to me yet. There's not a whole lot to show at the moment... just a dirty car with no rear suspension to speak of

The list above is what I have for the car now, but not all of it is on the car yet and might be awhile before it all gets on. We only get to work on the car on Saturdays and when you've got more mods to do to the car than you can shake a stick at it takes a good deal of time. If you and Tim get to fly down for your anniversary to Kershaw it should have most of all the mods done by then... I'm hoping all the suspension components and the stand alone from SDS. If you both make it I'll give the both of you a ride if you'd like

I hope I haven't "tainted" the thread... you're the only person to reply since early this afternoon

smashedheadcat · 01-29-2003, 01:43 PM

Quote:

Originally posted by 97whitevert
hehehe gotcha!! i was kidding with you!!

smashedheadcat · 01-29-2003, 01:45 PM

You haven't had that SVO long have you Shannon?? Ehh..... I guess that's been quite some time ago. Nevermind. Nice list of mods!! Dang nice list of mods.

winddysvt · 01-30-2003, 12:06 PM

Quote:

Originally posted by NO 5 OH
I promise I'll share pics with ya once I get them here, more or less. The friend that's helping me do all the work has a digital camera and has taken pictures, but I haven't had him e-mail them to me yet. There's not a whole lot to show at the moment... just a dirty car with no rear suspension to speak of

The list above is what I have for the car now, but not all of it is on the car yet and might be awhile before it all gets on. We only get to work on the car on Saturdays and when you've got more mods to do to the car than you can shake a stick at it takes a good deal of time. If you and Tim get to fly down for your anniversary to Kershaw it should have most of all the mods done by then... I'm hoping all the suspension components and the stand alone from SDS. If you both make it I'll give the both of you a ride if you'd like

I hope I haven't "tainted" the thread... you're the only person to reply since early this afternoon

==============

tainted the thread?

no way - no way !!

you keep posting ok?

winddysvt · 01-30-2003, 12:10 PM

Hey --

can y'all do me a favor?

some of ye already have (thanks)

can you help me with my Contour wheel decision?

whether ye likes SVT Contours or not, I need unbiased opinions ....

go here k?
http://www.svtcobraclub.com/svtbbs2/...&threadid=3292

and
BEE Honest !!!!

honesty is the key -
to be Happy !!!!

hey, that rhymes !!

winddysvt · 03-05-2003, 09:59 PM

Quote:

Originally posted by smashedheadcat
She takes wonderful care of me. My cobra hasn't been good enough to pose as any competition for the young lady. And if my car has to see any other "High Maintance" problems.... i'll sell it for dirt cheap, and buy myself a 5.0 I'd trade for a 1991 LX 5.0 knotch back.

==============

hey Josh --

do you have your car back yet?

I hope .....

winddysvt · 03-05-2003, 10:02 PM

is Josh really in the middle East?

you out there Josh?

were thinking about you !!!

winddysvt · 03-05-2003, 10:05 PM

Josh --

does this make you feel better?

my next mod for Trigger is gonna be a rear shock tower brace....

thats about all I can afford for her this year ---

although, I will be putting in a few things that I bought last year that I never installed....

last year was a bummer....

here's to a better year !!

and to pray for all of our friends out there and hope they all come home to us safely....

winddysvt · 03-05-2003, 10:07 PM

oh wait,

anti squat brackets or whatever there called....

yeah,
those ......

smashedheadcat · 03-07-2003, 05:53 PM

Quote:

Originally posted by winddysvt
==============

hey Josh --

do you have your car back yet?

I hope .....

Hey Bonny. I do have my engine back. I got it back a few days before I shipped out.

01-28-2003, 04:02 AM	#34
NO 5 OH Registered User Join Date: Nov 2001 Location: Hickory, NC Posts: 1,613	Okay here I go 01 True Blue Cobra Convertible #2266 of #3384 built on 06/08/01 Cobra embroidered floor mats Custom vintage aluminum Cobra shift knob K&N Filter 86 Black Mustang SVO 1 of 3382 built on 10/10/85 Precision Turbo and Engine T3/TO4E 60 trim stage 3 w/.63 A/R hybrid turbo Modified Buick Grand National intercooler w/Duttweiler neck Custom "Big Log" header by Bob Lee ATR 3" madrel bent downpipe off turbo, no cat; internal wastegate ATR 3" to 2 1/2" mandrel bent y-pipe Magnaflow 2 1/2" catback Gutted upper/ported lower stock intakes Fluidyne aluminum radiator Flex-a-lite dual 12" spal puller fan with adjustable thermostat and AC relay Turbo XS manual boost controller Turbo XS blow off valve Type H-RFL Tiny Avenger Cold Air MSD 6AL with Blaster coil Simple Digital Systems (SDS) stand alone engine management Seimens/Deca 83 lph fuel injectors Kirban adjusable FPR Walbro 255 lph in tank pump Autometer boost, fuel pressure, air/fuel ratio gauges on a-pillar SVPU white-faced overlay kit SVOCA bi-wing supports SPEC Star Stage 3 clutch Turbocoupe 8.8 rear w/3.55 gear Ford Racing "SVO" aluminum rear end girdle Ford Racing aluminum driveshaft Ford Racing HD upper control arms Maximum Motorsports caster/camber plates Maximum Motorsports std. lower control arms Maximum Motorsports adjustable rear sway bar H&R sport springs Energy Suspension bushings throughout Stillen Metal Matrix brake pads front and rear Motul 600 brake fluid 330 rwhp or bust When fundage permits last on the list will be: Ported/polished big valve iron head (1.89/1.59 valves) Custom reground Ranger roller cam Esslinger round tooth pulley upgrade w/adjustable cam pulley Esslinger Billet idler Esslinger Billet timing pointer Esslinger Billet water pump Esslinger 4" crank pulley 400+ rwhp or bust... 25 psi on stock bottom end __________________ 03 Torch Red 10th Anniversary Convertible A few bolt-on's, a black supercharger and some boost... The replacement for displacement has "Whipple" cast into it. Chuck Norris built my Cobra. It runs off the tears of small children and makes 10,000 horsepower. He calls it his "street version."

01-28-2003, 10:30 AM	#35
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	Wow Shannon ! thx for sharing that with us! Your '86 is absolutely awesome --- Hey, can you share a picture of it with us? __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

01-29-2003, 01:45 PM	#38
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	You haven't had that SVO long have you Shannon?? Ehh..... I guess that's been quite some time ago. Nevermind. Nice list of mods!! Dang nice list of mods. __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

01-30-2003, 12:10 PM	#40
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	Hey -- can y'all do me a favor? some of ye already have (thanks) can you help me with my Contour wheel decision? whether ye likes SVT Contours or not, I need unbiased opinions .... go here k? http://www.svtcobraclub.com/svtbbs2/...&threadid=3292 and BEE Honest !!!! honesty is the key - to be Happy !!!! hey, that rhymes !! __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

03-05-2003, 10:02 PM	#42
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	is Josh really in the middle East? you out there Josh? were thinking about you !!! __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

01-27-2003, 10:28 PM	#33
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	this will be a good place for me to throw in the possible modifications for Bully ..... heres the picture that I worked on: Attached Images __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

03-05-2003, 10:05 PM	#43
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	Josh -- does this make you feel better? my next mod for Trigger is gonna be a rear shock tower brace.... thats about all I can afford for her this year --- although, I will be putting in a few things that I bought last year that I never installed.... last year was a bummer.... here's to a better year !! and to pray for all of our friends out there and hope they all come home to us safely.... __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

03-05-2003, 10:07 PM	#44
winddysvt Registered User Join Date: Dec 2002 Location: Windy City, Illinois Posts: 1,291	oh wait, anti squat brackets or whatever there called.... yeah, those ...... __________________ Bonny and my Wonderful hubby Tim.. Proud Momma of 2, daughter in law and son in law One horse, several birds, two dogs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search