SCMC Message Forum  
Go Back   SCMC Message Forum > Vendor Forums > Pro-Dyno
User Name
Password

Register FAQ Members List SCMC Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread
Old 05-29-2013, 12:44 PM   #1
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
Project: 5.0 Coyote New Edge



What started out as just your regular run of the mill 04 2v GT with headers, has turned into quite the project and a monster build that we have dubbed "Project 5.0 Coyote New Edge."

Personally the 99-04 body style is one of my favorites, (never really jumping on the whole retro bandwagon) but one cannot dismiss the awesome power that the new Coyote 4V 5.0 has right out the gate. David felt the same way and knew that he wanted that kind of power in his New Edge. Tossing around the idea of adding a blower to his 2v or not, he knew that he would not be able to get the power gains SC 2v vs NA 4v that he wanted. David came to Pro Dyno with one thing in mind, a very customized 04 GT with the power of the new S197 cars.

With help from Summit Racing, Vintage Air, BBK Exhaust, Fore Innovations, JLT, McLeod Clutches, Steeda, Baer Brakes, Maximum Motorsports, AJE Racing and Pro Dyno, follow along as we detail the build, something that we are all very proud of!




The Donor Car:




__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:44 PM   #2
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
Removing the Stock 4.6L V8:





New Aluminator 5.0 from Ford Racing:
__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:44 PM   #3
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
Vintage Air provides a kit to re-route the air conditioning and power steering pumps, utilizing factory set-up:





The Vintage Air kit completely installed and a set of Coyote Swap specific BBK Long Tube Headers installed:


__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #4
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
Installing a McLeod RXT Clutch System & Flywheel:



Fore Innovations provided us with their custom fuel system with Pro Dyno engraved fuel rails:




__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #5
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698




A sneak peak at the custom fender piece to house the Coyote's computer system:



Motor mocked up with a Carbon Fiber JLT CAI:
__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #6
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
The new Coyote's have a completely different throttle set-up compared to the old 4.6, some custom wiring and pedal placement was needed:




Alot of time went into wiring everything correctly for the swap in order for both the 4.6 and 5.0 computers to work, the factory gauges as well as the throttle:



__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #7
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
With the re-routing of the AC system, custom lines had to be made in order to fit properly:




With the new Coyote in between the shock towers, there is not much room left for the battery, so a relocation kit from Summit Racing was utilized to move the battery to the trunk of the car, still leaving room for groceries:


__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #8
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
With work under the hood nearing completion, David wanted his car to handle as good as it looked, so he opted for a set of Tokico shocks and struts, Ford Racing C Springs, Steeda Caster Camber Plates, Steeda Rear Control Arms, and Maximum Motorsports Subframe Connectors:




David also wanted some good stopping power and opted for a Baer Big Brake System that you can see here, with the Tokico's topping the front suspension off:

__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 12:45 PM   #9
Pro-Dyno
Super Moderator
 
Pro-Dyno's Avatar
 
Join Date: Dec 2004
Location: Fort Mill, SC
Posts: 698
Adding his own custom touch to the already stunning engine bay, our in house painter added these screaming yellow carbon fiber coil covers and intake, as well as painting our custom fender piece to house the computer screaming yellow:





And to show his support of Pro Dyno, we added a set of our new quarter window decals in matching yellow:



After hitting the dyno, you can see that the numbers speak for themselves. N/A vs N/A the power of these new Coyote's is untouchable!:



Thanks again for following David's build, and to David for trusting us with his vehicle! It was a long and tiring process, but in the end David knew it would be worth it! We cannot wait to hear his stories from the road and what he and others have to say about his 5.0 Coyote New Edge!
__________________
Pro-Dyno is offline   Reply With Quote
Old 05-29-2013, 08:21 PM   #10
snakbitn
SCMC Member
 
snakbitn's Avatar
 
Join Date: Jan 2008
Location: monroe, n.c.
Posts: 196
Dan,that looks some what familiar .Great looking job guy's!

Robert
snakbitn is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:09 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2017 SCMC, Inc